Key Takeaways
- PAX success depends more on room accuracy than box count
- Leveling and wall conditions determine final alignment quality
- Always quote PAX builds before booking, configuration varies too much
- Door type choice should be driven by room clearance, not just aesthetics
Technical Notes, Photo Catalog & Manuals
See Real Condo Project Photos
Review completed assembly layouts, room clearances, and finished setups before booking.
ManualsIKEA Assembly Guides (Official)
Pull exact product manuals by article number before starting complex builds or wardrobes.
Scope ChecklistPAX / Wardrobe Scope Planner
Use this to verify wall width, ceiling clearance, and door swing before finalizing setup.
Critical Measurements Before Purchase
Treat PAX as a room project, not a furniture box. Measure wall width, ceiling clearance, and floor slope before you confirm frame count and door style. These measurements should happen before the IKEA order is placed, not after delivery arrives at your building.
- Total wall width including trim and outlet offsets
- Ceiling height including any light fixture interference
- Depth clearance for sliding vs hinged doors (sliding doors need 5–7cm more depth)
- Floor level variation across the full wardrobe run
Why Leveling Changes Everything
Even small floor slope, 2–3mm across a 3-frame run, can create visible misalignment, door drift, and reveal gaps between frames. Condo floors are often not perfectly level, and older buildings have more variation. Leveling shims and careful sequencing prevent these issues from appearing after you have filled the wardrobe.
Sliding vs Hinged Doors in Condos
The door choice is not just aesthetic, it changes the room requirement. Sliding doors save front clearance (important in small bedrooms) but demand cleaner track tolerance and perfect plumb alignment. Hinged doors are simpler mechanically but need swing clearance and conflict checks against beds, dressers, and room corners.
| Door type | Best for | Watch-outs |
|---|---|---|
| Sliding doors | Tight walkway rooms, small bedrooms | Track tolerance and plumb alignment are critical |
| Hinged doors | Wider bedroom access, more door options | Swing clearance near beds, desks, nightstands |
| Open frames (no doors) | Minimal aesthetic installs, dressing areas | Dust control and visual organization |
Multi-Frame Configurations
A single PAX frame is manageable with one person and reasonable condo space. Two- and three-frame configurations are a different category of job. Frame alignment, shared rail installation, and synchronized leveling across multiple units require significantly more time and at least two people for the tipping step.
Should PAX Be Standard-Visit Pricing?
Usually no. Full wardrobe runs are quote-first jobs because time and complexity vary heavily by room condition and final configuration. A single narrow frame with no doors in a simple bedroom is very different from a three-unit sliding door configuration in a tight condo bedroom. PAX builds start from $299, quoted after reviewing room photos and configuration details.
Toronto condo elevator tip: PAX frames (especially the 236cm height) need elevator booking and careful corridor navigation. Confirm your elevator can accommodate 236cm panels standing upright, or plan to angle them, which requires two people.
Need a PAX Wardrobe Assembled in Toronto?
Send wall dimensions, ceiling height, and your exact PAX configuration. Get a fixed-price quote. PAX builds from $299.
Book Appointment WhatsApp